Oce 31x5E, Maintenance Manual

Page: 19 / 178

Introduction 19
Access the system
Enter or quit the key operator system
Introduction
The key operator system contains the settings to change, or restore, the default
configuration of the Océ 31x5E.
You can enter the key operator system if the Océ 31x5E is not processing a job.
A PIN is required to make the settings available. Only Océ Service can change
the Key Operator PIN.
The changes made in the Key Operator System are applied after you have left
the Key Operator System.
Before you begin
1.
Make sure that the Océ 31x5E does not process or announce a job.
Illustration
[4] Enter the Key Operator System with a PIN
[4] Enter the Key Operator System with a PIN
[5] Quitting the Key Operator System
[5] Quitting the Key Operator System