Oce 31x5E, Maintenance Manual

Page: 149 / 178

Safety information 149
This machine is not designed for connection to an IT power system. An IT
power system is a voltage network in which the neutral wire is not connected
to earth.
For the equipment connected via a wall socket: locate the machine close to a
wall socket that is easily accessible.
For the equipment connected via a fixed connection to the electricity grid: the
disconnect device in the fixed connection should be easily accessible.
Never connect the machine to a mains voltage deviating from the value as
defined on the power-marking label. If connection to a different mains voltage
is required, contact your local Océ organization.
Do not use another mains connection cable than the one supplied with the
machine. If replacement of the main connection cable is required, because the
cable is damaged or defect, contact your local Océ organization for a correct
replacement of the mains connection cable.
Surroundings
Do not block the ventilation openings of the machine.
Ensure that the machine is placed on a level, horizontal surface of sufficient
strength. See the Océ 31x5E Product Safety Data Sheets in this appendix for
information about the weight of the equipment.
Ensure there is sufficient space around the machine. This facilitates reloading
materials as well as maintenance.
Do not place the machine in rooms which are too small or insufficiently
ventilated. See the Océ 31x5E Product Safety Data Sheets in this appendix for
information about the recommended room volume and ventilation.
General
Always use materials recommended by Océ and developed for this Océ
machine. Materials not approved by Océ may result in faults in your machine.
Do not use the machine when it is emitting unusual sounds. Remove the plug
from the power socket or turn off the fixed connection to the electricity grid
and contact your local Océ organization.