Oce 31x5E Maintenance Manual Download Page 40

Page: 40 / 178

Océ 31x5E Configuration and Maintenance Manual

Before you begin

Enter the key operator system.

Illustration

[22] Enable the copy control device

Configuring the copy control device

Activate the 'Accounting' section.

Open the 'General' card.

Press the 'Copy control device' function key to select 'Enabled' .

Job

Requirement

Charges

Copy job

The user must insert coins
or a credit card, to access
the machine.

Jobs are charged to the
'Copy control device'
system account.

Automatic print job

The user can perform an
automatic print job if au-
tomatic print jobs are per-
mitted.

Jobs are not charged to
any account.

Mailbox job

The user must enter coins
or a credit card, to access
the mailbox.

Jobs are charged on the
'Copy control device'
system account.

Scan job

The user must enter coins
or a credit card, to access
the machine.

Jobs are charged on the
'Copy control device'
system account.

Summary of Contents for 31x5E



















































































































































































Search results

Summary of Contents for 31x5E

Reviews:

Related manuals for 31x5E

Brands by name

Popular brands

Oce 31x5E, Maintenance Manual

Search results

Summary of Contents for 31x5E

Reviews:

Related manuals for 31x5E

Brands by name

Popular brands