Oce 31x5E, Maintenance Manual

Page: 35 / 178

Set the defaults 35
Define the end-of-job confirmation
Introduction
To help the non-experienced user, you can define a supplementary user request
to finish the jobs with different job parts. To assemble the job parts, the user
must press the combine key and confirm the end of the job with the start key
. If you enable the end-of-job confirmation, the user gets a second request to
press the start Key .
Note:
You can also use the Océ System configuration to define the end-of-job
confirmation.
Before you begin
1.
Enter the key operator system.
Illustration
[18] Enable the end-of-job confirmation
[18] Enable the end-of-job confirmation
Defining the end-of-job confirmation
1.
Activate the 'Machine' section.
2.
Open the 'Error information' card.
3.
Press the 'End-of-job confirmation' function key to select 'Enabled' or
'Disabled' .
Check
1.
Exit the key operator system.
2.
To check the entered selection, make a copy job with different job parts.