Oce 31x5E, Maintenance Manual

Page: 26 / 178

26 Océ 31x5E Configuration and Maintenance Manual
Define the default job settings
Define the IP address information
Introduction
To configure the IP address information, you can use the Key Operator System
and the Océ System Configuration.
You can configure the IP address statically or dynamically through BootP or
DHCP.
When selecting the address assignment, use one of the following settings:
Before you begin
1.
Enter the Key Operator System.
Illustration
[9] Obtain the IP address
[9] Obtain the IP address
Address assignment Result
'Manual' The IP address must be manually entered in the 'IP
address' function box. 'Manual' is the default set-
ting.
'Use DHCP' DHCP is used to obtain the IP address.
'Use BootP' BootP is used to obtain the IP address.