Océ imagePRESS C7010VPS series, Technical Manual

Page: 317 / 362

When output recovery is suppressed, the printer does not check if the output is correct after a
recovery. The host system and the operator are responsible for the recovery. This means that
the operator must indicate at the host where printing needs to resume.
• Face orientation
With this setting, the default face orientation of the requested finisher can be overruled per
setup.
NOTE
Mpt = millipoints = 1/72000 inch.
IPDS image shift settings Range
Image shift in feed direction of side 1
Image shift in cross-feed direction of
side 1
Image shift in feed direction of side 2
Image shift in cross-feed direction of
side 2 0 mm is the default value.
Minimum: -4.2
Maximum: 4.2
Step: 0.1 mm
• The image shift in feed direction is the margin of the front edge and the back edge of the sheet.
The front edge and back edge are defined by the feed direction of the sheet. The image shift in
cross-feed direction is the margin of the side edges of the sheet. Side 1 is the front of a sheet.
Side 2 is the back of a sheet.
Colour management settings Range
Default CMYK input profile For PDF and native IPDS data using DeviceCMYK. Input
profile or “none”.
Default monochrome CMYK input
profile Input profile or “ibm” or “postscript”.
Default RGB input profile For PDF and native IPDS data using DeviceRGB. Input
profile or “none”.
Default monochrome RGB input pro-
file Input profile or “none” or “ibm” or “postscript”.
Rendering intent Perceptual (default), Saturation, Absolute colorimetric,
Relative colorimetric
Print full colour or B/W Full colour (default), B/W
Ignore toner transfer curve from data
steam Yes (default), No
Ignore embedded output profile
NOTE
PCL contains no embedded
output profiles.
Yes (default), No
Black preservation On (default), Off
Halftone Normal (default), Fine, Error diffusion
• Rendering intent
Use setting "Rendering intent" only when no render intent is defined in the data stream.
• Halftone
This setting defines the halftone pattern for text, graphics and images.
SRA IPDS settings
Chapter 14 - SRA IPDS 317
imagePRESS C7010VPS series v2.2