Océ imagePRESS C7010VPS series, Technical Manual

Page: 76 / 362

The imagePRESS C7010VPS series supports standard sized and custom sized tab media, within
the engine limitations. The tabs are always on the trailing edge of the sheet.
The imagePRESS C7010VPS series supports tabs with a maximum width of 15 mm.
MediaPosition
Input tray selection is supported via the /MediaPosition key of a setpagedevice command and
contains a zero-based integer number that specified a tray to be selected. This functionality
allows an explicit selection of an input tray while printing.
The mapping between tray number and actual tray is product specific.
The Paper Input Module (PIM) closest to the engine is handled as the first PIM in the list. The next
PIM to the left as the second. Input tray order is from top to bottom, starting with '/MediaPosition
0' for PS setpagedevice command.
A tray number consists of 2 digits, the first digit identifies the PIM and the second digit identifies
the tray within the PIM.
PIM-numbering: 1, 2, 3.
Tray-numbering: 0 .. 3.
Tray numbers
Roll Feeder PIM 3 (left) PIM 2 (middle) PIM 1 (right)
90 20 10 00
21 11 01
22 12 02
23 13 03
Tray selection is supported. This functionality allows an explicit selection of an input tray while
printing. The selection is made via the /MediaPosition key of a setpagedevice command. The /
MediaPosition is a zero-based integer number that specifies the input tray. The mapping between
tray number and actual tray is product specific.
NOTE
The PageSize must be specified and it must be the PageSize of the paper format present in the
specified tray. It is the responsibility of the end user to know what is in the selected tray when
tray selection is used.
Media attributes can be left unspecified. In that case, they are set to match the contents of the
specified tray.
When the setpagedevice command specifying the MediaPosition is encountered, the PageSize of
the requested tray is compared to the current PageSize.
Two situations can occur:
• If the PageSize of the paper format matches the paper format in the specified tray, the tray
selection is accepted. An accepted tray selection setting is valid until:
- a new PageSize different from the current one is requested,
- a request for MediaPosition is null.
• If the PageSize of the paper format does not match the paper format in the specified tray, the
tray selection is ignored. An ignored tray selection setting becomes valid when:
- new settings (PageSize, Color, ..) that matches the media in the specified tray is requested.
If an invalid input tray is specified (for instance “/MediaPosition 99999”), the tray selection
command is ignored. The tray selection command is then processed as “/MediaPosition 0”.
Media selection
76 Chapter 5 - Adobe® PostScript® 3™
imagePRESS C7010VPS series v2.2