Océ imagePRESS C7010VPS series, Technical Manual

Page: 220 / 362

ppmPortGroup
Introduction
Only channels that can be used to configure a driver are present in this group.
ppmPortEnabled
Access : read-only item.
See the prtChannelState
Value: true(1) if prtChannelState is set to printDataAccepted(3), otherwise false(2).
ppmPortName
Access : read-only item.
Based on the prtChannelTypeTC.
Values can be:
prtChannelType ppmPortName
chLPDServer(8) “LPD Server”
chServerMessageBlock(27) “SMB”
chPortTCP(37) “TCP Port”
ppmPortServiceNameOrURI
Access : read-only item.
Values can be:
ppmPortName ppmPortServiceNameOrURI
“LPD Server” lpd://<hostname>
“SMB” smb://<hostname>/<sharename>
“TCP Port” raw-tcp://<hostname:<port number>
ppmPortProtocolType
Access : read-only item.
See the prtChannelType
Value: see the prtChannelType.
ppmPortProtocolTargetPort
Access : read-only item.
The port number when the prtChannelType does not have a unique well known port, otherwise 0.
0 means that the used service port is the port reserved by IANA for the concerning protocol. The
protocol is implemented in a standard way.
Values can be:
ppmPortGroup
220 Chapter 9 - SNMP
imagePRESS C7010VPS series v2.2