Océ imagePRESS C7010VPS series, Technical Manual

Page: 255 / 362

Layout transformation
Sheet content rotation
Syntax
//LayoutPreparationParams/@Rotate
Type
Enumeration
Supported range
@Rotate Description
Rotate0 No rotation
Rotate180 The content of all pages is rotated 180 degrees
Description
Rotate specifies the rotation that is applied to the content of the sheet of the job. In case of
imposition, the rotation is applied to the impositioned sheets. Any shifts are applied to the
rotated content of the sheet.
Image shift
Syntax for the front sides
//LayoutPreparationParams/PageCell/ImageShift/@ShiftFront
When partitioned:
//LayoutPreparationParams[@PartIDKeys="RunIndex"]/
LayoutPreparationParams[@RunIndex="…"]/PageCell/ImageShift/@ShiftFront
Syntax for the back sides
//LayoutPreparationParams/PageCell/ImageShift/@ShiftBack
When partitioned:
//LayoutPreparationParams[@PartIDKeys="RunIndex"]/
LayoutPreparationParams[@RunIndex="…"]/PageCell/ImageShift/@ShiftBack
Type
XYPair
Description
@ShiftFront | @ShiftBack = “X Y”
The X and Y lengths are specified using the following conventions: X origin is left, Y origin is
bottom of the media orientation.
The unit for this attribute is: point (1 point=1/72 inch).
Layout transformation
Chapter 10 - JDF interface specification 255
imagePRESS C7010VPS series v2.2