Océ imagePRESS C7010VPS series, Technical Manual

Page: 180 / 362

prtInputType
Access : read only item.
If the Input is a paper tray, the object returns sheetFeedAutoNonRemovableTray (value 4).
For bypass printing, sheetFeedManual (value 5) is returned.
The input trays are of type sheetFeedAutoNonRemovableTray (4).
Post inserter trays are of type sheetFeedManual (5).
Supported values:
• unknown(2)
• sheetFeedAutoRemovableTray(3)
• sheetFeedAutoNonRemovableTray(4)
• sheetFeedManual(5)
• continuousRoll(6)
• continuousFanFold(7)
prtInputDimUnit
Access : read only item.
The used unit is related to the selected Country and is based on the SDS continent setting.
For all countries except “US”, micrometres(4) is returned .
For the “US” users, tenThousandthOfInches (3) is returned.
prtInputMediaDimFeedDirDeclared
Access
: read only item.
The orientation of the paper in the input sub-unit and the media size determine the size to be
expressed in the feed direction. The size is converted to the required measurement unit
(prtInputDimUnit).
Custom sizes: when this feature exists, the custom sizes are shown as defined in the media
catalogue.
The imagePRESS C7010VPS series supports the paper sizes as defined in:
Supported media
on
page 13 .
prtInputMediaDimXFeedDirDeclared
Access : read only item.
The orientation of the paper in the input sub-unit and the media size determine the size to be
expressed in the cross feed direction. The size is converted to the required measurement unit
(prtInputDimUnit).
prtInputMediaDimFeedDirChosen
Access : read only item.
The chosen media feed dimensions are the same as the declared ones.
prtInputMediaDimXFeedDirChosen
Access
: read only item.
The chosen media cross feed dimensions are the same as the declared ones.
prtInputGroup
180 Chapter 9 - SNMP
imagePRESS C7010VPS series v2.2