OcÃ© imagePRESS C7010VPS series Technical Manual Download

Page: 193 / 362

prtChannelGroup

The group prtChannelGroup consists of the prtChannelTable table.

NOTE

Each Channel entry is visible even if it is not licenced.

1rst entry for LPD.

2nd entry for SMB

3rd entry for RAW socket

4rd entry for RAW socket

5th entry for RAW socket

prtChannelType

Access

: read only item.

chLPDServer(8) for index 1

chServerMessageBlock(27) for index 2

chPortTCP(37) for index 3

chBidirPortTCP(38) for index 4

chPortTCP(37) for index 5

prtChannelProtocolVersion

Access

: read only item.

An empty string ("") will be returned.

prtChannelCurrentJobCntlLangIndex

Access

: read only item.

Return value is 1.

prtChannelDefaultPageDescLangIndex

Access

: read only item.

Return value is 1.

prtChannelState

Access

: read only item.

This object returns the state of the channel, depending on the index value and if it is enabled or
disabled.

Mapping:
• Disabled: noDataAccepted(4)
• Enabled: printDataAccepted(3)

prtChannelIfIndex

Access

: read only item.

This object returns the link between the channel and the interface board.

prtChannelGroup

Chapter 9 - SNMP

193

imagePRESS C7010VPS series v2.2

Summary of Contents for imagePRESS C7010VPS series











































































































































































































































































































































































Search results

Summary of Contents for imagePRESS C7010VPS series

Reviews:

Related manuals for imagePRESS C7010VPS series

Brands by name

Popular brands

OcÃ© imagePRESS C7010VPS series, Technical Manual

Search results

Summary of Contents for imagePRESS C7010VPS series

Reviews:

Related manuals for imagePRESS C7010VPS series

Brands by name

Popular brands