Océ imagePRESS C7010VPS series, Technical Manual

Page: 276 / 362

The stapling at job level is not supported if a stapling at subset level is specified. This means that
the attributes of the following element are ignored when this element contains other
StitchingParams element(s):
/JDF/ResourcePool/StitchingParams
Insert
Syntax
XPath: JDF/ResourcePool/LayoutPreparationParams[@PartIDKeys="RunIndex"]/
LayoutPreparationParams[@RunIndex="<value>"]/InsertSheet[@SheetFormat="Blank" and
@SheetType="InsertSheet" and @SheetUsage="<value>"]
@SheetUsage Description
Header The insert sheet must be inserted before the subset defined by
@RunIndex="<value>".
Trailer The insert sheet must be inserted after the subset defined by
@RunIndex="<value>".
A media for the insert can be specified with //InsertSheet/Layout/MediaRef.
By default, the jogging and the stapling defined for a subset in GatheringParams and
StitchingParams are applied to the inserted sheets attached to this subset.
It is allowed to override this behaviour with attribute @IncludeInBundleItem.
Supported values for @IncludeInBundleItem are:
• “None” (default)
• “New”: A new bundle item is created
• “Before”: Insert sheet is member of the previous bundle
All following Inserts with @IncludeInBundleItem ="before" must be part of this bundleItem.
Jogging and Stapling can be specified explicitly for Inserts using Gathering and StichingParams
partition with BundleItemIndex.
NOTE
BundleItemIndex must not be used when the RunIndex partition is possible.
Partitioning for subset/page programming
276 Chapter 10 - JDF interface specification
imagePRESS C7010VPS series v2.2