Océ imagePRESS C7010VPS series, Technical Manual

Page: 248 / 362

XYPair
Description
The syntax for @Dimension is “X Y”, where X and Y are respectively the width (horizontal edge)
and height (vertical edge) of the media. If X and/or Y = “0”, the Media Dimension specification
will be ignored and the orientation is assumed to be portrait.
The unit for this attribute is: point (1 point=1/72 inch).
There is a tolerance of 5 points when specifying the media dimension. Any specified media which
is within 5 points distance to a known standard media, or to a custom media defined in the media
catalogue, is changed to the nearest corresponding known or custom media dimension.
Preferred feed edge
Syntax
XPath: /JDF/ResourcePool/Media/GeneralID[@IDUsage="oce:Orientation"]/@IDValue
Type
String
Supported range
@IDValue Escape sequence
LongEdgeFeed Request to print the job with long edge fed paper.
ShortEdgeFeed Request to print the job with short edge fed paper.
Description
The preferred media feed edge is determined by "GeneralID" named "oce:Orientation". The
attribute "@IDValue" is a request. Required job finishing (if specified) may cause the device to use
another feed edge than specified as preferred feed edge.
Media
248 Chapter 10 - JDF interface specification
imagePRESS C7010VPS series v2.2