Océ imagePRESS C7010VPS series, Technical Manual

Page: 264 / 362

@Orientation and
@CombinedProcessIndex]
The attribute @CombinedProcessIndex corresponds to the ID of “Stitching” in /JDF/@Types.
Example: Dual top staple (landscape oriented)
<JDF ID="jdf_1" Type="Combined" Category="DigitalPrinting" Types="LayoutPreparation
Imposition Interpreting Rendering DigitalPrinting Stitching">
<ResourcePool>
<Component ID="Product_4" Class="Quantity" Status="Unavailable"
ComponentType="PartialProduct"/>
<StitchingParams ID="ProcessID_5" Class="Parameter" Status="Available" StitchType="Side"
NumberOfStitches="2"/>
<Component ID="Product_5" Class="Quantity" Status="Unavailable"
ComponentType="PartialProduct"/>
</ResourcePool>
<ResourceLinkPool>
<ComponentLink rRef="Product_4" Usage="Input" Orientation="Flip0"
CombinedProcessIndex="5"/>
<StitchingParamsLink rRef="ProcessID_5" Usage="Input"/>
<ComponentLink rRef="Product_5" Usage="Output" Orientation="Flip0"
CombinedProcessIndex="5"/>
</ResourceLinkPool>
</JDF>
Remark
Stitching is supported on all products that use an HW configuration that allows stitching.
However, not all staple positions are available on every output device. The contradictions are
reported on the product UI.
The following table shows how components with different binding edges must be rotated and/or
flipped to get the stapling location in the top left hand corner (1 staple) or on the left hand side (2
staples):
Double staple side positions
ComponentLink/
@Orientation //Media/@Dimension is Portrait //Media/@Dimension is Landscape
@Orientation not
specified
"Flip0"
"Rotate0"
"Flip90"
"Rotate90"
"Flip180"
"Rotate180"
4
Output / finishing
264 Chapter 10 - JDF interface specification
imagePRESS C7010VPS series v2.2