Océ imagePRESS C7010VPS series, Technical Manual

Page: 84 / 362

Staple
Introduction
Stapling can be enabled through the Staple parameter of the setpagedevice operator (standard
PS3 behaviour). The older /staple key is not supported.
Valid values are:
• 0: do not staple.
• 1: staple at device deactivation (Not supported).
• 2: staple per sub set.
• 3: staple per sub set.
NOTE
/Staple=2 triggers stapling of the subset from the next page and on. For stapling at job level, you
must use the ticket instead.
StapleDetails
Staple options can be provided in the StapleDetails dictionary. This dictionary must contain the
entries /Type and /StapleLocation; and optionally a /ReadingOrientation entry. Several Types are
supported and depending of the type the meaning of the /StapleLoction is different:
/Type Description
1 /StapleLocation is a string
/ReadingOrientation is not used
16 /StapleLocation is a number
22 /StapleLocation is a string
/ReadingOrientation is a string and used if available
OutputType must be set to Auto, or to any tray which supports stapling. Staple options can be
provided in the StapleDetails dictionary.
Type = 16 and Type = 22 are supported.
/Type /StapleLocation Description
16 0 No staples (legacy)
1 1 portrait staple (legacy)
2 1 landscape staple (legacy)
3 2 portrait staples (legacy)
22 (TopLeft) or (LeftTop) Relative to the ReadingOrientation
given in StapleDetails
(TopRight) or (RightTop)
(BottomLeft) or (LeftBottom)
(BottomRight) or (RightBottom)
(LeftDual)
(RightDual)
(TopDual)
(BottomDual)
Staple
84 Chapter 5 - Adobe® PostScript® 3™
imagePRESS C7010VPS series v2.2