50
• As long as the daily alarm is activated, the watch will beep
every day at the set time.
4. Stopwatch mode
Press the [M] button 1 time in the current time mode to get to the stopwatch mode.
How to measure elapsed time
• Press the [U] button in ‘All Zero’ display to start the
counting.
• Press the [U] button again to stop the counting.
How to get a split time
• While the watch is counting, press the [D] button to select
the split time display.
• Press the [D] button to come back to the counting display.
If no button has been pressed for 10 seconds, the watch
will automatically come back to the counting display.
How to reset the stopwatch
• Press the [U] to stop the counting.
• Hold the [D] button for 2 seconds to reset the display to
‘All Zero’ again.
How to go back to current time mode
• Press the [M] button 2 times in stopwatch mode to go back
to the current time mode.
5. Countdown timer mode
Press the [M] button 2 times in the current time mode to get to
the Countdown Timer Mode.
How to set the timer
• Hold the [M] button for 2 seconds until ‘Hour’ starts flashing
and ‘Second’ disappears.
• As shown in the diagram, press [M] button to move
between the settings (‘Hour’, ‘Minute’).
• Press the [U] or [D] button to set the value of the flashing
setting (hold the buttons to change set value at a higher
speed).
• Hold the [M] button for 2 seconds to save your setting and
exit the setting sequence.