Boot Monitor
LITE5200B User’s Manual, Rev. 0
5-8
Freescale Semiconductor
Using FEC ETHERNET device
TFTP from server 10.81.109.159; our IP address is 10.81.108.96
Filename 'u-boot.bin'.
Load address: 0x3000
Loading: ##########################################
done
Bytes transferred = 213872 (34370 hex)
=>
5.6.2
Serial Download
two serial protocols are available for serial download over the UART connection. the loadb command may
be used to download a binary image file using the Kermit protocol. Additionally the loads command may
be used to download srecord ( ascii ) formated images.
Usage:
loadb
[ address ] [ baud ]
This will download a binary file over the UART using the Kermit protocol. Specifying the address and baud rate are optional, however
specifying the address to be loaded is highly recommended.
Usage:
loads
[ address ] [ baud ]
This will download an srecord file over the UART using the Kermit protocol. Specifying the address and baud rate are optional,
however specifying the address to be loaded is highly recommended.
example:
=>
loadb
0x3000
## Ready for binary (kermit) download to 0x00003000 at 115200 bps...
## Total Size = 0x00000e62 = 3682 Bytes
## Start Addr = 0x00003000
=> go 0x3000
5.7
Executing an Image
After code has been downloaded the ‘
go
’ command may be used to execute an application.