Steps to Getting Started
LITE5200B User’s Manual, Rev. 0
Freescale Semiconductor
3-3
Figure 3-2. Power On Reset Splash Screen for U-Boot
8. Type ‘help’<RETURN> at the command prompt for an overview of the available U-Boot
commands
U-Boot 1.1.3 (Jul 11 2005 - 16:46:38)
CPU: MPC5200 v2.1 at 462 MHz
Bus 132 MHz, IPB 132 MHz, PCI 33 MHz
Board: Freescale MPC5200 (Lite5200B)
I2C: 85 kHz, ready
DRAM: 256 MB
FLASH: 32 MB
*** Warning - bad CRC, using default environment
PCI: Bus Dev VenId DevId Class Int
00 1a 1057 5809 0680 00
In: serial
Out: serial
Err: serial
Net: FEC ETHERNET
IDE: Bus 0: OK
Device 0: not available
Device 1: not available
Type "run flash_nfs" to mount root filesystem over NFS
Hit any key to stop autoboot: 0
=>