Hardware Description
LITE5200B User’s Manual, Rev. 0
4-2
Freescale Semiconductor
4.3
Power Connections
Multiple power connection options are available on the Lite5200B evaluation system.
4.3.1
DC Power Jack
–
J35
The J35 DC power jack provides a 5V, fused, input which is capable of supplying the Lite5200B system.
5V is regulated into 4 separate power domains. Care should be taken to ensure that the supplied voltage
does not exceed 5V.
4.3.2
ATX Power Connector
–
J36
The J36 molex connector provides an interface to any standard commercial of the shelf power ATX
supply.
Note:
The connector on the board has pin 1 labeled as pin 4.
Please notice that pin 1 on the board has the square pad and
is nearest SW4. Ignore the pin label on the connector itself.
4.3.3
Banana Jacks
–
J32 J28 J27 J26 J25
Connectors J25, J26, and J28 are provided to allow voltage measurement for each power domains.
Supplies are marked on the board and correspond to the following:
Low Power
PSC3_4
Misc Headers
See Below
2
PCI-1, PCI-2
PCI, EXT_AD[31:0]
DDR
SDRAM
UART
PSC1
USB
USB1
1
Non-Mux mode
2
Section 4.5.7, “General Purpose Headers – J16 J17 J18 J19 J20 J21 J22 J23,” on
page 4-8
Table 2. ATX Power Connector – J36
Pin Name
1
+12
2
GND
3
GND
4
+5
Table 4-1. Pin Configuration
Functional
MPC5200B Pin Group(s)