Appendices
System Specifications
90
Nuvo Group Ltd.
10
Appendices
Appendix A.
Manufacturer Declaration
This appendix describes the system’s compliance with applicable IEC and RF standards.
Overview
See the following tables for specific information regarding the system’s compliance with the IEC
60601-1-2:2014 standards.
The
INVU by Nuvo™
System is intended for use in the electromagnetic environment specified below.
The customer or the user of the
INVU by Nuvo™
device should ensure that it is used in such an
environment.
Table 10-1. System Compliance Information
–
Electromagnetic Emissions
The
INVU by Nuvo™
system is intended for use in the electromagnetic environment specified below.
The customer or the user of
INVU by Nuvo™
system should assure that it is used in such an
environment.
Emissions test
Compliance
Electromagnetic environment
–
guidance
CISPR 11
Group 1
The
INVU by Nuvo™
system uses RF energy only
for its internal function. Therefore, its RF
emissions are very low and are not likely to cause
any interference in nearby electronic equipment.
FCC 47 CFR; CISPR 11
Class B
The
INVU by Nuvo™
system is suitable for use in
all establishments, including domestic
establishments and those directly connected to
the public low-voltage power supply network that
supplies buildings used for domestic purposes.
Harmonic emissions:
IEC 60601-1-2:2014;
Complies
Voltage fluctuations flicker
emissions:
IEC 60601-1-2:2014;
Complies