The INVU™ App
Starting a Monitoring Session
52
Nuvo Group Ltd.
Starting the Session Setup
The Session Setup process can begin after following the session preparation guidelines and
applying the INVU Sensor Band™.
Note:
For a successful setup, please avoid movements during the process.
Note:
The blue light on the band Controller blinks until the session ends. This indicates
that the monitoring is working properly, and that data is transferring via the Bluetooth
connection to your smartphone.
Tips for a successful monitoring session!
✓
Scrub your abdominal skin with soap and water before applying the band.
✓
Ensure the sensors are fully attached to your body all the time.
✓
Make sure you are connected to a Wi-Fi network.
✓
Start monitoring at a comfortable relaxed position: sitting, reclining or lying on your
back.
✓
Minimize your movements as much as possible during monitoring.
✓
Pay attention to INVU app sounds and notifications during the session.
✓
Avoid initiating or answering phone calls or the use
of any highly consuming internet
bandwidth
applications of your smartphone during the session setup and the
monitoring itself.
Note:
The setup can take up to 6 minutes and the successful last minute is included in the
monitoring session duration.
Note:
During the session setup and the monitoring session, avoid changing the mobile
device localization setting.
Tips for a successful monitoring session are displayed. After going over the tips, you can press
the
“GOT IT” link to remove the tips from display. G
eneral pregnancy facts are now displayed
instead of the tips. The information changes automatically and can be manually maneuvered
by swiping them right or left.