Invu by Nuvo™
User Manual
Using the INVU Sensor Band™
NV-UMLS-0012
25
Note:
After the band is powered ON, you have twenty five minutes to start a monitoring
session. If a monitoring session does not begin within twenty five minutes, the INVU Sensor
Band
™
will turn itself off automatically.
Monitoring sessions are best performed in a comfortable position while lying down on
the back or sitting or reclining in a quiet room.
Minimize your movements as much as
possible during monitoring
.
Press “
PREPARE FOR
MONITORING” to begin the monitoring session.
Follow the session preparation instructions to ensure proper use of the device.
The monitoring session begins with a session setup to make sure your session runs
smoothly.
Figure 5-2
. INVU Sensor Band™ Home Page “PREPARE FOR MONITORING”
button
Note:
A blue light on the band Controller blinks until the session ends. This indicates the
monitoring is working properly and that data is transferring via the Bluetooth connection
to your smartphone.
The session will stop automatically after reaching the duration prescribed by your medical
care team.