NuAire LabGard NU-560-400, Operation & Maintenance Manual

Page: 22 / 103

OM0295
Rev 2 September 2020 Page 22 of 103
6.1.2 Standby Mode
When the BSC is not in use, the TOUCHLINK LCD screen will display Standby, the icons along the top and the time
and date at the bottom as shown below. Any of the function icons, except the blower, that initiates Run Mode,
may be turned on and off in standby mode. The menu icon may also be accessed for additional user menus.
6.1.3 Run Mode
Anytime the blower icon is selected the Run Mode screen will appear. The Run Mode screen will display a LFBSC
profile and initiate and display the countdown of a 150 second warm-up period. During the warm-up period the
aseptic cleaning process may begin. If the sliding window is raised an audible and visual alarm will occur, but may
be silenced by pressing the alarm silence icon that appears.
Airflow readings will not be displayed during warm-up period.
Once the warm-up period is complete, airflow readings and all system functions will operate and be displayed.