manualshive.com logo in svg

NTI ENVIROMUX-MINI-LXO, Installation And Operation Manual

Share
Download
NTI ENVIROMUX-MINI-LXO Installation And Operation Manual Download Page 96

NTI 

Mini Server Environment Monitoring System 

 

89

 

IP Filtering 

 

Included in the Security Configuration options is IP Filtering.   IP Filtering provides an additional mechanism for securing the 
ENVIROMUX.  Access to the ENVIROMUX network services (SNMP, HTTP(S), SSH, Telnet) can be controlled by allowing or 
disallowing connections from various IP addresses, subnets, or networks.   

 

Up to 16 IP Filtering rules can be defined to protect the ENVIROMUX from unwanted access from intruders.  Each rule can be set 
as Enabled or Disabled.  Rules can be set to explicitly drop attempts to connect, or to accept them.    

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                                       Figure 107- Text Menu-IP Filtering 

 

To configure an IP Filter, select an IP Filter rule from the list and press <

Enter

>.  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                                 Figure 108- Text Menu-Configure IP Filter rule 

 

Summary of Contents for ENVIROMUX-MINI-LXO




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands