manualshive.com logo in svg

NTI ENVIROMUX-MINI-LXO, Installation And Operation Manual

Share
Download
NTI ENVIROMUX-MINI-LXO Installation And Operation Manual Download Page 87

NTI 

Mini Server Environment Monitoring System 

 

80

 

IPv4 Settings 

The IP Settings menu contains the network connection settings for the ENVIROMUX.  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                               

    

     Figure 93- Text Menu-IPv4 Settings Menu 

IP Settings 

Description 

Mode 

Select between Static (manual) , or DHCP (automatic IP and DNS) settings 

IP Address 

Enter a valid IPv4 address (default value is 192.168.1.23) 

Subnet Mask 

Enter a valid subnet mask (default value is 255.255.255.0) 

Default Gateway 

Enter a valid gateway (default gateway value is 192.168.1.1) 

Preferred DNS 

Enter a preferred domain name server address 

Alternate DNS 

Enter an alternate domain name server address 

 

If the administrator chooses to have the DNS and IP address information filled in automatically via DHCP,   the SMTP server and 
port number still need to be entered for email alerts to work.  If the SMTP server requires a password in order for users to send 
emails, the network administrator must first assign a user name and password to the ENVIROMUX.     

 

Press <

Tab

> to highlight 

Save

 and press <

Enter

> to save before pressing <

Esc

> to exit. 

IPv6 Settings 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                                   Figure 94- Text Menu-IPv6 Settings Menu 

If IPv6 protocol will be used, change the mode to “Enabled” and apply valid in addresses for the IPv6 address and gateway.  To 
use a 6to4 tunnel, change “Disabled” to “Enabled” and apply valid local and remote addresses.  

Summary of Contents for ENVIROMUX-MINI-LXO




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands