NTI
Mini Server Environment Monitoring System
41
Account Settings
Description
Username
Enter the desired username for this user
Admin
Place a checkmark here if this user should have administrative privileges
Enabled
Place a checkmark here to enable this user to access the ENVIROMUX
Password
Enter a password that a user must use to login to the system
A password must be assigned for the user’s login to be valid
Passwords must be at least 1 keyboard character.
Confirm
Re-enter a password that a user must use to login to the system
Title
Enter information as applicable
Department
Enter information as applicable
Company
Enter information as applicable
Group Settings
Group 1-8
Place a checkmark if the user should receive messages from sensors, accessories, or IP
devices in Group 1, 2, 3… thru 8 (see also pages 24 and 28 for group assignments)
Contact Settings
Email alerts
Place a checkmark if the user should receive messages via email
Email address
Enter a valid email address if this user should receive email alert messages
Syslog alerts
Place a checkmark if the user should receive alerts via syslog messages
SNMP traps
Place a checkmark if the user should receive alerts via SNMP traps
Syslog/SNMP IP address
Enter a valid syslog/SNMP IP address for the user to receive syslog/SNMP messages
SMS Alerts
Place a checkmark if the user should receive alerts via SMS messages
SMS Number
Enter a phone number for the GSM modem to call to alert the user via SMS message
Schedule Settings
Schedule Type
Always active
- user will receive messages at all hours of each day
Active during defined times
- user will only receive alert messages during times as
outlined below
Start Day
First day of the week the user should begin receiving messages
End Day
Last day of the week the user should receive messages
Start Hour
First hour of the day the user should begin receiving messages
End Hour
Last hour of the day the user should receive messages
SNMP Settings
Authentication Protocol
Choose between MD5 or SHA to require authentication, or none to disable it
Authentication Passphrase
Assign the passphrase to be used to enable the receipt of SNMP v3 messages
Privacy Protocol
Choose between DES or AES to encrypt SNMP readings or traps or none to disable encryption.
If encryption is enabled, then the Authentication Protocol must also be set at “MD5” or “SHA”.
Privacy Passphrase
Assign the passphrase to be used to open and read readings or alert messages received via
SNMP v3
Traps Type
Choose between SNMPv1, SNMPv2C, or SNMPv3
After changing any settings in the user profile, press “Apply”.
