manualshive.com logo in svg

NTI ENVIROMUX-MINI-LXO, Installation And Operation Manual

Share
Download
NTI ENVIROMUX-MINI-LXO Installation And Operation Manual Download Page 95

NTI 

Mini Server Environment Monitoring System 

 

88

 

 

Authentication Settings 

Security in the ENVIROMUX can be managed one of two ways; through the local settings (passwords assigned in user settings on 
page 84) or through an LDAP server.   If security is configured to use LDAP mode, then the passwords for users must be those 
found on a configured LDAP server.   

Select “Authentication Settings” from the list and press <

Enter

>.  A menu providing an option to either user Local authentication 

or LDAP mode.  When in LDAP mode, usernames on the LDAP server must match those in the user settings of the ENVIROMUX 
or access will be denied.   

Note: When the root user logs with the ENVIROMUX in LDAP mode, if the LDAP server is not responding, local 
authentication will be tried.    

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                                        Figure 106- Text Menu-Authentication Settings 

 

 

 

User Authentication 

 

Mode 

Select Local to use authentication based on passwords in the ENVIROMUX user configuration 

Select LDAP to use authentication based on passwords in an LDAP server 

Primary LDAP Server 

Enter Hostname or IP address of Primary LDAP Server 

Secondary LDAP Server 

Enter Hostname or IP address of Secondary LDAP Server (optional) 

LDAP Server Type 

Tab to choose from the following:  

            Generic LDAP server 

            Novell Directory server 

            Microsoft Active Directory 

LDAP Service Base 

Enter the Base DN for users (ex: ou=People,dc=mycompany,dc=com) 

 

Even though LDAP authentication is being used, each user must also have a local account.  User permission level is established 
by the local account.  

Press <

Tab

> to highlight 

Save

 and press <

Enter

> to save before pressing <

Esc

> to exit. 

 

 

 

Summary of Contents for ENVIROMUX-MINI-LXO




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands