manualshive.com logo in svg

NTI ENVIROMUX-MINI-LXO, Installation And Operation Manual

Share
Download
NTI ENVIROMUX-MINI-LXO Installation And Operation Manual Download Page 65

NTI 

Mini Server Environment Monitoring System 

 

58

 

Support 

 

The Support section of the menu includes two links, Manual and Downloads.    

 

The Manual link will open the pdf manual for the ENVIROMUX on the NTI website.    

 You must have Adobe Reader installed on your PC to open this.    

 

The Downloads link will take you to the Firmware Downloads page for the ENVIROMUX on 
the NTI website.   All versions of firmware and MIB files for the ENVIROMUX will be found 
there, available for immediate download to your PC.   

 

 

 

                                                                                                                                               Figure 59- Support 

 

 

 

 

 

 

 

Logout 

 

To logout of the ENVIROMUX user interface, click on the “Logout” section in the menu. 

A gray menu label will drop down.   Click on the gray label to be immediately logged out.    
The login screen will appear, at which you can close your browser or log back in.    

 

 

 

 

 

                                                                                                                                            Figure 60- Logout 

 

 

 

Summary of Contents for ENVIROMUX-MINI-LXO




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands