manualshive.com logo in svg

NTI ENVIROMUX-MINI-LXO, Installation And Operation Manual

Share
Download
NTI ENVIROMUX-MINI-LXO Installation And Operation Manual Download Page 85

NTI 

Mini Server Environment Monitoring System 

 

78

 

 

Time Settings 

Description 

Time Zone 

Enter the appropriate time zone  

Enable Daylight Saving 

Change to “Yes” to have the time change in accordance Daylight Saving Time rules  

Set Date 

Enter the system date in MM-DD-YYYY format 

Set Time 

Enter the system time of day in hh:mm:ss format 

Enable NTP 

Change to “Enabled”  to allow the ENVIROMUX  to automatically sync up with a time server via 
NTP 

NTP server 

If the NTP is enabled, enter the Domain Name or IP address of the NTP server 

NTP Frequency 

Enter the frequency (in minutes) for the ENVIROMUX to query the NTP server (minimum is 5 
minutes)  

E-mail Time Stamp 

Change to “Enabled”  to allow the ENVIROMUX  to automatically apply a time stamp to e-mail 
messages sent to users 

SMS Time Stamp 

Change to “Enabled”  to allow the ENVIROMUX  to automatically apply a time stamp to SMS 
messages sent to users 

 

Press <

Tab

> to highlight 

Save

 and press <

Enter

> to save before pressing <

Esc

> to exit. 

 

 

Restore Default Settings 

Select this option to restore the ENVIROMUX to the configuration settings it had upon receipt from the factory.    

Be careful!  

 

This will erase all user configuration settings.   Upon restoration, the ENVIROMUX will reboot.  Allow 1 minute before trying to 
reconnect and log in again.    

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                                  Figure 90- Text Menu-Restore Default Settings 

Note: If “Restore Defaults” is used, the IP address will also be restored to its default address of 192.168.1.23 with a login 
name “root” and password “nti”.    To restore the root password to “nti” without having to restore all default settings, 
contact NTI for assistance.  

To identify the IP address of the ENVIROMUX without restoring defaults, use the Discovery Tool (page 17).   

 

Default settings can also be restored using the “Restore Defaults” button on the front of the ENVIROMUX (page 101) or through 
the web interface (page 34) 

 

 

 

Summary of Contents for ENVIROMUX-MINI-LXO




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands