NTI
Mini Server Environment Monitoring System
50
Event Notification Settings (Continued)
Auto Acknowledge
Place a checkmark in this box to have alert notifications in the summary page return to normal
state automatically when an Event is no longer being triggered.
Enable Syslog Alerts
Place a checkmark in this box to have alert notifications sent via Syslog messages
Enable SNMP traps
Place a checkmark in this box to have alert notifications sent via SNMP traps (v2c)
Enable Email Alerts
Place a checkmark in this box to have alert notifications sent via Email
Email Subject
Enter the subject to be viewed when an email alert message is received
Attach IP Camera capture to
email
Associate an Event with an IP camera. Select an IP camera from the drop-down box. An
image will be captured and sent with the alert message when an alert is sent via e-mail. IP
cameras that are monitored by the ENVIROMUX (page 31) will be available for this purpose.
Note: To be able to send IP camera captures as e-mail attachments, viewer security (in
your camera’s configuration) needs to be disabled. Consult your IP camera manual to
see if this feature is present and for instructions on how to do this.
Enable SMS Alerts
Place a checkmark in this box to have alert notifications sent via SMS messages (requires a
modem)
After all options are selected, click the “Save” button. This Event will now be added to the Events page (Figure 49). Up to 50
events can be defined. Events can be configured to trigger alerts by themselves, and/or be used in combination with other
events to trigger Smart Alerts.
With Events defined, Smart Alerts (up to 20) can be configured to use Event combinations to send alert messages.
Figure 52- Smart Alert summary page
From the side menu, select “Smart Alerts”, and “Smart Alerts” again. On the Smart Alerts page, click on “Add New Smart Alert”.
A new numbered Smart Alert will be added to the summary page (above). To configure the Smart Alert, click on it.
