manualshive.com logo in svg

NTI ENVIROMUX-MINI-LXO, Installation And Operation Manual

Share
Download
NTI ENVIROMUX-MINI-LXO Installation And Operation Manual Download Page 35

NTI 

Mini Server Environment Monitoring System 

 

28

 

 The IP Device Configuration page will immediately open.  Here you can configure the ENVIROMUX to ping the IP Device as often 
as desired and to react to a lack of response by sending alert messages. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                                         Figure 24- IP Device Configuration page 

 

 

IP Device Settings 

Description 

Description 

The description of the IP Device that will be viewed in the Summary page and in the body of alert 
messages 

IP Address 

The IP address of the IP Device 

Group 

Assign the IP Device to any group 1 -8     

Ping Period 

Enter the frequency in minutes or seconds that the ENVIROMUX should ping the IP Device  

Timeout 

Enter the length of time in seconds to wait for a response to a ping before considering the attempt a 
failure 

Retries 

Enter the number of times the ENVIROMUX should ping a non-responsive IP device before changing 
its status from normal to alarm and sending an alert 

 

The alert settings and data logging are the same as for sensor configuration, described on page 24.     

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for ENVIROMUX-MINI-LXO




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands