manualshive.com logo in svg

NTI ENVIROMUX-MINI-LXO, Installation And Operation Manual

Share
Download
NTI ENVIROMUX-MINI-LXO Installation And Operation Manual Download Page 39

NTI 

Mini Server Environment Monitoring System 

 

32

 

DC Power 

 

On the Summary Page (under Monitoring), the status of the DC power supply can be found (only applicable for models with  
battery backup).    The ENVIROMUX will monitor the power coming into the ENVIROMUX and can be configured to send an alert 
in the event that power supply fails.  Click on  “Edit” to configure how the ENVIROMUX should respond.   

 

 

 

 

                       Figure 32- Excerpt from the Summary Page showing DC Power monitoring 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                                 Figure 33- DC Power Alert Configuration 

 

Many of the same options that apply to sensor alerts (page 22) can be configured for DC Power alerts.   The battery backup will 
keep the ENVIROMUX on line for up to 2.3 hours in the event of a power failure.  

 

 

 

 

 

Summary of Contents for ENVIROMUX-MINI-LXO




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands