NTI
Mini Server Environment Monitoring System
36
Network Configuration
From the Network Setup page the administrator can either choose to have the IP address and DNS information filled in
automatically by the DHCP server, or manually fill in the fields (use a static address). Settings can be entered for either the IPv4
or IPv6 protocols. To view the Network Configuration page, click on
Network
from the
Administration
section of the menu.
Note: If you select “DHCP”, make sure a DHCP server is running on the network the ENVIROMUX is connected to.
Figure 37- Network Configuration page
IPv4 Settings
Description
Mode
Select between Static (manual) , or DHCP (automatic IP and DNS) settings
IP Address
Enter a valid IP address (default address shown above)
Subnet Mask
Enter a valid subnet mask (default value shown above)
Default Gateway
Enter a valid gateway (default gateway shown above)
Preferred DNS
Enter a preferred domain name server address
Alternate DNS
Enter an alternate domain name server address
Enter IPv6 settings as applicable.
For descriptions of SMTP, SNMP, and Server Settings, see page 38. .
Note: The values shown here are
for local (static) address
configuration only.
Address values for DHCP
configuration will only be displayed
in the System Information page
(page 46).
