manualshive.com logo in svg

NTI ENVIROMUX-MINI-LXO, Installation And Operation Manual

Share
Download
NTI ENVIROMUX-MINI-LXO Installation And Operation Manual Download Page 53

NTI 

Mini Server Environment Monitoring System 

 

46

Update Firmware 

The Update Firmware page is used to change the firmware of the ENVIROMUX.   Occasionally new features or changes to 
existing features will be introduced and new firmware with these changes will be made available on the NTI website  
(

http://www.networktechinc.com/download/d-environment-monitoring.html

).  To view the Update Firmware page, select 

Firmware 

in the

 Administration

  section of the main menu.  Once a user has downloaded the required file for firmware upgrade, 

this page will be used to upload it to the ENVIROMUX.    

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                                                          Figure 46- Update Firmware page 

 

1.  Download the most current firmware file from 

http://www.networktechinc.com/download/d-environment-monitoring.html

  

to a location on your PC. 

2.  Click on the “Browse” button and locate and select the firmware file for the ENVIROMUX (

enviromux-mini-lxo-vx-

x.bin, for example

). 

3.  Click on the “Update” button to perform the firmware update.  The firmware update process will take approximately 5 minutes                   

    while the ENVIROMUX installs the firmware.   Once the update file has been installed, the unit will automatically  

    reboot and the login screen will appear.  

 

 

      

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for ENVIROMUX-MINI-LXO




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands