manualshive.com logo in svg

NTI ENVIROMUX-MINI-LXO, Installation And Operation Manual

Share
Download
NTI ENVIROMUX-MINI-LXO Installation And Operation Manual Download Page 108

NTI 

Mini Server Environment Monitoring System 

 

101

 

SYSTEM RESET BUTTON 

A System Reset push-button is on the front-panel and is recessed from the panel to prevent accidental use of the button. Pressing 
the System Reset button will cause the ENVIROMUX to restart, just as if it were power-cycled.  A momentary press of the System 
Reset push-button will activate this function. The reset button can be used at any time. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                                               Figure 124- Location of Reset buttons 

RESTORE DEFAULTS BUTTON 

Another button, “Restore Defaults”, is located on the front of the ENVIROMUX-MINI-LXO (see above).  The button can be used to 
clear all configuration changes and restore the ENVIROMUX to default settings including the administrative password.   To use 
this button, press it with a pen or other small pointed object and hold it for 5 seconds.  The ENVIROMUX will reboot and be ready 
for login within its usual start-up time period.   If possible, consider saving the ENVIROMUX configuration before using this button 
(page 34).  

USB PORTS 

The ENVIROMUX are each equipped with a USB Type A female ports for connection of a USB flash drive and a GSM modem

 

(page 14) for receiving alert messages via SMS.  The ports are compatible with USB 2.0 Full Speed flash drives.  When enabled 
(page 57) and with the USB flash drive connected, the Event and Data Logs will be written to a text file on the flash drive in 
addition to the memory in the ENVIROMUX.

       When a modem is connected (page 14), it will automatically be sensed by the 

ENVIROMUX  (page 35). 

 

      

 

 

 

 

 

 

 

 

 

                                  Figure 125- USB Flash Drive and GSM modem ports 

Summary of Contents for ENVIROMUX-MINI-LXO




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands