manualshive.com logo in svg

NTI ENVIROMUX-MINI-LXO, Installation And Operation Manual

Share
Download
NTI ENVIROMUX-MINI-LXO Installation And Operation Manual Download Page 28

NTI 

Mini Server Environment Monitoring System 

 

21

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                                      Figure 17- Status page for a temperature sensor 

If the temperature sensor is in alert status, the user has the option to either 

acknowledge

 the alert or 

dismiss

 it.    If the user 

acknowledges the alert, no additional alert messages will be sent during that alert status cycle.     If the user dismisses the alert, 
another alert message will be sent once the “notify again after” time designated on the configuration page (page 23) elapses.  

After selecting 

acknowledge

 or 

dismiss

, click 

Apply Changes

.   

The administrative user can open the sensor configuration page by clicking on the 

Configure

 button at the bottom of the sensor 

status page (above) or by clicking on 

Edit

 from the Summary page.  From the sensor configuration page the user can apply 

settings to control how or if alert messages are sent in the event the sensor is in alert status, threshold settings, and data logging 
settings.    

 

To clear these values and start 
over, press “Clear Records”

Summary of Contents for ENVIROMUX-MINI-LXO




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands