manualshive.com logo in svg

NTI ENVIROMUX-MINI-LXO, Installation And Operation Manual

Share
Download
NTI ENVIROMUX-MINI-LXO Installation And Operation Manual Download Page 92

NTI 

Mini Server Environment Monitoring System 

 

85

 

 

 

Account Settings 

Description 

Enabled 

Change to “Yes” to enable this user to access the ENVIROMUX 

Admin 

Change to “Yes” if this user should have administrative privileges 

Title 

Enter information as applicable (optional) 

Department 

Enter information as applicable (optional) 

Company 

Enter information as applicable (optional) 

 

More about User Privileges 

The root user (or any user with administrator rights) can change the root password and configure how the root user will receive 
alert messages.   Users with administrative rights can change all configuration settings except for the root user name.  

 

User Contact Settings 

Select “Contact Settings” from the list and press <

Enter

>.  A menu with the contact settings for that specific user will open. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                              Figure 102- Text Menu-User Contact Settings 

 

Contact Settings 

 

Group 1 

Change to “Yes” if the user should receive messages from sensors, IP devices and accessories 
in Group 1   

Group 2 

Change to “Yes” if the user should receive messages from sensors, IP devices and accessories 
in Group 2   

Enable Email  

Change to “Yes” if the user should receive messages via email 

Email address 

Enter a valid email address if the user should receive email alert messages 

Syslog alerts 

Change to “Yes” if the user should receive alerts via syslog messages 

SNMP traps 

Change to “Yes” if the user should receive alerts via SNMP traps 

Syslog/SNMP IP address 

Enter a valid syslog/SNMP IP address for the user to receive syslog/SNMP messages 

SMS 

Change to “Yes” if the user should receive alerts via SMS messages 

Phone Number 

Enter a valid phone number for the user to receive SMS messages 

 

Press <

Tab

> to highlight 

Save

 and press <

Enter

> to save before pressing <

Esc

> to exit. 

 

 

Summary of Contents for ENVIROMUX-MINI-LXO




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands