manualshive.com logo in svg

NTI ENVIROMUX-MINI-LXO, Installation And Operation Manual

Share
Download
NTI ENVIROMUX-MINI-LXO Installation And Operation Manual Download Page 20

NTI 

Mini Server Environment Monitoring System 

 

13

 

Connect the Power 

 

Note: Sensors should be connected before supplying power to the ENVIROMUX.  

 

 

1.

 

Connect the AC adapter to the connection marked "PWR" on the ENVIROMUX and plug it into an outlet.   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                                   Figure 10- Connect the AC adapter and power-up 

 

 

2.

 

Use the NTI Discovery Tool (page 17) to configure network settings. 

 

 

 

 

 

Front Panel LEDs Indicate Status 

 

With proper connections made, the 

ENVIROMUX

 is now ready to power ON.  With the power cord attached and plugged into an 

AC outlet, the “Power”  green LED should be illuminated on the front of the 

ENVIROMUX

.    

 The red “Fault” LED will illuminate 

when power is first applied and while the ENVIROMUX boots up (for up to 60 seconds).    Once the red LED goes OFF, the 
ENVIROMUX is ready for use.  After a completed boot-up, the red LED will only illuminate when one of the connected sensors is 
in alert.    

 

 

 

 

 

 

 

 

 

 

 

                                                 Figure 11- LEDs on front of 

ENVIROMUX 

 

 

 

Summary of Contents for ENVIROMUX-MINI-LXO




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands