Northrop Grumman Sperry Marine VisionMaster FT, User Manual

Page: 513 / 533

Radar/Chart Radar User Guide Annex B – Static Site
65900010 B-5
Static Position
At start up, the static position LAT/LON values
default to 00º North and 000º East. As a Static
Site may operate without position input, the
position value is always displayed as green
(valid).
A position value may be entered manually, or
automatically connect to a GPS sensor, if
available, to obtain an initial position.
To enter a position bearing:
1. Navigate to the Position Sensor Data Display in the Sensors menu
The Position folder appears.
2. To update the static site position to the
values defined by a GPS sensor click the
Update to GPS button. The GPS
LAT/LON values are entered.
3. To manually enter LAT/LON values click
in the Static fields. The text becomes
editable (green) and the numeric keypad
appears.
4. Enter the required LAT/LON position from the
keypad and click the keypad OK key. The values
appear in the Static LAT/LON fields and the
keypad is removed.
The manually entered position is saved in system memory
and will persist when the system is re-started.