Northrop Grumman Sperry Marine VisionMaster FT, User Manual

Page: 458 / 533

Brilliance Radar/Chart Radar User Guide
13-2 65900010
Day and Night Modes
The Day / Night modes function enables you
to select the correct colour setting for optimum
display purposes in various lighting conditions.
The colour modes include two daylight
settings, one dusk and two night time settings.
The current setting is shown with its radio
button highlighted.
To select a different setting click on the radio
button to the left of the setting, the screen
colours change relevant to the day, dusk or
night mode selected.
Alternatively, click on the Up/Down
BRILL buttons on the Control Panel to
brighten or darken the colour setting.
When the colour setting is changed the Brightness Check window is
activated, prompting to adjust the monitor's brightness control for optimal
setting.
If the colour setting is changed from Day Bright/Black or Dusk to Night or
Night Red the system displays a warning requesting confirmation of the
change in setting. To confirm click the
Yes button on the Warning window,
or click the No button to cancel. If no confirmation is given within 10
seconds the system reverts to the previous colour setting.
Multi-node Settings
On a multi-node system changes to the day/night settings on one node are
applied to all other nodes on the system.
The commissioning engineer may configure a node not to be affected or
capable of making a global day/night setting change, and in this case the
setting will be applied to the local node only