Northrop Grumman Sperry Marine VisionMaster FT, User Manual

Page: 303 / 533

Radar/Chart Radar User Guide Routes
65900010 8-59
Route Display Settings
The Route Display Settings sub-menu enables
you to select the graphic display of labels
associated with the displayed route.
The following display settings are available:

Display Monitored Route - displays the
route currently being monitored,
defaults to ticked.

Critical Point labels - displays a label for
each critical point (CP1 etc.)

Leg bearings - displays bearing data of
each route leg in degrees

Planned speeds - displays own ship's
planned speed between each waypoint.

Waypoint labels - displays a label for each waypoint (W1 etc.)

Wheel-over labels - displays a numerical label for each wheel-over
(WO(2) etc.)

XTD Alarm Lines - displays a series of XTD lines on the safety
region lines.
When all display options are ticked the route is displayed as shown below.
The Wheel-over type section of the folder determines how the wheel-over
lines are drawn and includes the following radio buttons:

Parallel to next leg - the wheel-over line is drawn parallel to the
next leg in the route.

Perpendicular to leg - the wheel-over line is drawn at right angles to
the route leg that approaches the associated turn.
The bottom of the Route Display Settings window shows a description of
the settings as the cursor moves over each setting text.