Northrop Grumman Sperry Marine VisionMaster FT, User Manual

Page: 420 / 533

Charts Radar/Chart Radar User Guide
12-40 65900010
Chart Databases
The Chart Databases window lists all chart
databases available to the system and allows
databases to be enabled or disabled.
When the system is in its initial state, i.e. the
first time the system is run; all chart databases
that have been configured for the system are
listed as enabled.
Enabling and Disabling Chart Databases
The chart databases are listed in the Enabled
field in the order in which they will be used for
rendering chart data. The databases with the
highest priority are listed at the top of the
Enabled field and the lowest priority at the
bottom. The higher a chart database appears in
the enabled list the sooner it will be selected for
rendering.
To change the chart database priority, or to disable or enable a chart
database do the following:
To change the chart database order of priority:
1. Click on a chart database in the Enabled list, if the database is
neither at the top or bottom of the list then both the Up button and
Down button to the right of the list become available.
2. Click on the Up or Down button to move the position of the chart
database within the list.
To disable or enable a chart database:
1. To disable, click on the chart database in the Enabled list and click
the Down button between the Enabled and Disabled fields. The
selected chart database is moved to the
Disabled field, and will not
be rendered or available for selection from the Chart and Radar
Maps button.
2. To enable a previously disabled chart database click on the
database in the disablement list and click the Up button between
the
Enabled and Disabled fields. The database is moved to the
Enabled list.