Nokia IP60 - Security Appliance, User Manual

Page: 429 / 494

Configuring HTTPS
Chapter 19: Maintenance 429
Configuring HTTPS
You can enable IP60 appliance users to access the Nokia IP60 Portal from the Internet. To do so, you must
first configure HTTPS.
Note:
Configuring HTTPS is equivalent to creating a simple Allow rule, where the
destination is
This Gateway
. To create more complex rules for HTTPS, such as
allowing HTTPS connections from multiple IP address ranges, define Allow rules for
TCP port 443, with the destination
This Gateway
. For information, see Using Rules
on page 238.
To configure HTTPS
1. Click
Setup
in the main menu, and click the
Management
tab.
The
Management
page appears.
2. Specify from where HTTPS access to the Nokia IP60 Portal should be granted.
See Access Options on page 430 for information.
Warning:
If remote HTTPS is enabled, your IP60 appliance settings can be changed
remotely, so it is especially important to make sure all IP60 appliance
users’
passwords are difficult to guess.
Note:
You can use HTTPS to access the Nokia IP60 Portal from your internal
network, by surfing to https
:
//my.firewall.