Nokia IP60 - Security Appliance User Manual Download

Page: 249 / 494

Using Port-Based Security

Chapter 12: Setting Your Security Policy

249

Configuring Port-Based Security

To configure 802.1x port-based security for a port

Configure RADIUS authentication on the appliance.

For instructions, see

Using RADIUS Authentication

on page 404.

Configure the clients for 802.1x authentication.

For information, refer to your RADIUS server documentation.

To configure dynamic VLAN assignment, do the following:

Add port-based VLAN networks as needed.

See

Adding and Editing Port-Based VLANs

on page 130.

Configure RADIUS option 81 [Tunnel-Private-Group-ID] on the RADIUS server.

For information, refer to your RADIUS server documentation.

To configure a Quarantine network other than the LAN or DMZ, add a port-based VLAN
network.

See

Adding and Editing Port-Based VLANs

on page 130.

Click

Network

in the main menu, and click the

Ports

tab.

The

Ports

page appears.

Next to the desired port, click

Edit

Summary of Contents for IP60 - Security Appliance















































































































































































































































































































































































































































































































Search results

Summary of Contents for IP60 - Security Appliance

Reviews:

Related manuals for IP60 - Security Appliance

Brands by name

Popular brands

Nokia IP60 - Security Appliance, User Manual

Search results

Summary of Contents for IP60 - Security Appliance

Reviews:

Related manuals for IP60 - Security Appliance

Brands by name

Popular brands