Nokia IP60 - Security Appliance User Manual Download

Page: 176 / 494

Configuring High Availability on a Gateway

176

Nokia IP60 Security Appliance User Guide

The fields are enabled.

Next to each network for which you want to enable HA, select the

check box.

The

Internet-Primary

field represents the WAN interface, and the

Internet-Secondary

field represents the

WAN2 interface.

In the

Virtual IP

field, type the default gateway IP address.

This can be any unused IP address in the network, and must be the same for all gateways.

You can assign a virtual IP address to any internal interface, as well as to Internet connections that are
configured as ―LAN - Static IP‖.

Click the

Synchronization

radio button next to the network you want to use as the

synchronization interface.

Note:

The synchronization interface must be the same for all gateways, and must

always be connected and enabled on all gateways. Otherwise, multiple appliances
may become active, causing unpredictable problems.

The synchronization interface cannot be an Internet connection or a wireless
interface.

Complete the fields using the information the following table.

Click

Apply

Summary of Contents for IP60 - Security Appliance















































































































































































































































































































































































































































































































Search results

Summary of Contents for IP60 - Security Appliance

Reviews:

Related manuals for IP60 - Security Appliance

Brands by name

Popular brands

Nokia IP60 - Security Appliance, User Manual

Search results

Summary of Contents for IP60 - Security Appliance

Reviews:

Related manuals for IP60 - Security Appliance

Brands by name

Popular brands