Nokia IP60 - Security Appliance, User Manual

Page: 406 / 494

Using RADIUS Authentication
406 Nokia IP60 Security Appliance User Guide
Table 103: RADIUS Page Fields
In this field… Do this…
Primary/Secondary
RADIUS Server
Configure the primary and secondary RADIUS servers.
By default, the IP60 appliance sends a request to the primary RADIUS
server first. If the primary RADIUS server does not respond after three
attempts, the IP60 appliance will send the request to the secondary
RADIUS server.
Address Type the IP address of the computer that will run the RADIUS service
(one of your network computers) or click the corresponding
This
Computer
button to allow your computer to host the service.
To clear the text box, click
Clear
.
Port
Type the port number on the RADIUS server’s host computer.
The default port number is 1812.
Shared Secret Type the shared secret to use for secure communication with the
RADIUS server.
Realm If your organization uses RADIUS realms, type the realm to append to
RADIUS requests. The realm will be appended to the username as
follows: <username>@<realm>
For example, if you set the realm to ―myrealm‖, and the user "JohnS"
attempts to log on to the Nokia IP60 Portal, the IP60 appliance will
send the RADIUS server an authentication request with the username
―JohnS@myrealm‖.
This field is optional.
Timeout Type the interval of time in seconds between attempts to communicate
with the RADIUS server.
The default value is 3 seconds.
RADIUS User
Permissions
If the RADIUS VSA (Vendor-Specific Attribute) is configured for a user,
the fields in this area will have no effect, and the user will be granted
the permissions specified in the VSA.
If the VSA is not configured for the user, the permissions configured in
this area will be used.