Nokia IP60 - Security Appliance User Manual Download

Page: 130 / 494

Configuring Network Settings

130

Nokia IP60 Security Appliance User Guide

Adding and Editing Port-Based VLANs

To add or edit a port-based VLAN

Click

Network

in the main menu, and click the

My Network

tab.

The

My Network

page appears.

Do one of the following:

To add a VLAN, click

Add Network

To edit a VLAN, click

Edit

in the desired VLAN’s row.

The

Edit Network Settings

page for VLAN networks appears.

In the

Network Name

field, type a name for the VLAN.

In the

Type

drop-down list, select

Port Based VLAN

The

VLAN Tag

field disappears.

In the

Mode

drop-down list, select

Enabled

The fields are enabled.

In the

IP Address

field, type the IP address of the VLAN network's default gateway.

Note:

The VLAN network must not overlap other networks.

In the

Subnet Mask

field, type the VLAN's internal network range.

If desired, enable or disable Hide NAT.

See

Enabling/Disabling Hide NAT

on page 112.

If desired, configure a DHCP server.

Summary of Contents for IP60 - Security Appliance















































































































































































































































































































































































































































































































Search results

Summary of Contents for IP60 - Security Appliance

Reviews:

Related manuals for IP60 - Security Appliance

Brands by name

Popular brands

Nokia IP60 - Security Appliance, User Manual

Search results

Summary of Contents for IP60 - Security Appliance

Reviews:

Related manuals for IP60 - Security Appliance

Brands by name

Popular brands