Nokia IP60 - Security Appliance, User Manual

Page: 165 / 494

Adding Internal Networks to Bridges
Chapter 7: Using Bridges 165
In this field… Do this…
IP Address Type the IP address to use for this gateway on this bridge.
Note:
The bridge must not overlap other networks.
Subnet Mask Select this bridge's subnet mask.
Adding Internal Networks to Bridges
Note:
In order to add a VLAN of any type (port-based, tag-based, VAP, or WDS link)
to the bridge, you must first create the desired VLAN.
For information on adding port-based VLANs, see Adding and Editing Port-Based
VLANs on page 130. For information on adding tag-based VLANs, see Adding and
Editing Tag-Based VLANs on page 131.For information on adding VAPs, see
Configuring Virtual Access Points on page 209. For information on adding WDS
links, see Configuring WDS Links on page 212.
To add an internal network to a bridge
1. Click
Network
in the main menu, and click the
My Network
tab.
The
My Network
page appears.
2. Click
Edit
in the desired network's row.
3. In the
Mode
drop-down list, select
Bridged
.
New fields appear.
4. Complete these fields as described below.