Nokia IP60 - Security Appliance, User Manual

Page: 245 / 494

Using Rules
Chapter 12: Setting Your Security Policy 245
In this field… Do this…
Port Range To specify the port range to which the rule applies, type the start port
number in the left text box, and the end port number in the right text box.
Note:
If you do not enter a port range, the rule will apply to all ports. If you
enter only one port number, the range will include only that port.
Protocol
Number
Type the number of the protocol for which the rule should apply.
Source Select the source of the connections you want to allow/block.
To specify an IP address, select
Specified IP
and type the desired IP address
in the field provided.
To specify an IP address range, select
Specified Range
and type the desired
IP address range in the fields provided.
Destination Select the destination of the connections you want to allow/block.
To specify an IP address, select
Specified IP
and type the desired IP address
in the text box.
To specify an IP address range, select
Specified Range
and type the desired
IP address range in the fields provided.
To specify the Nokia IP60 IP address, select
This Gateway
.
To specify any destination except the Nokia IP60 Portal and network
printers, select
ANY
.
If the current time
is
Select this option to specify that the rule should be applied only during
certain hours of the day.
You must then use the fields and drop-down lists provided, to specify the
desired time range.
Forward the
connection to
Select the destination to which matching connections should be forwarded.
To specify an IP address, select
Specified IP
and type the desired IP address
in the text box.
This field only appears when defining an Allow and Forward rule.