Nokia IP60 - Security Appliance User Manual Download

Page: 282 / 494

SmartDefense Categories

282

Nokia IP60 Security Appliance User Guide

In this field…

Do this…

Disable relaxed

UDP length

verification

The UDP length verification sanity check measures the UDP header length

and compares it to the UDP header length specified in the UDP header. If

the two values differ, the packet may be corrupted.

However, since different applications may measure UDP header length

differently, the IP60 appliance relaxes the UDP length verification sanity

check by default, performing the check but not dropping offending packets.

This is called relaxed UDP length verification.

Specify whether the IP60 appliance should relax the UDP length verification

sanity check or not, by selecting one of the following:

True.

Disable relaxed UDP length verification. The IP60 appliance

will drop packets that fail the UDP length verification check.

False.

Do not disable relaxed UDP length verification. The IP60

appliance will not drop packets that fail the UDP length
verification check. This is the default.

Summary of Contents for IP60 - Security Appliance















































































































































































































































































































































































































































































































Search results

Summary of Contents for IP60 - Security Appliance

Reviews:

Related manuals for IP60 - Security Appliance

Brands by name

Popular brands

Nokia IP60 - Security Appliance, User Manual

Search results

Summary of Contents for IP60 - Security Appliance

Reviews:

Related manuals for IP60 - Security Appliance

Brands by name

Popular brands